1. HOME
  2. Product
  3. Related products
  4. Smooth sleeve

Related products

Smooth sleeve

  • Piping assembly plate for hot water heaters
  • Please refer to “Product Drawings” and “Product Specifications” for detailed information such as materials of each part.
  • Please refer to the “Installation Instructions” for installation procedures.

Applications and Features

Product Description

Intended purpose

  • This is a piping assembly plate for water heaters that allows multiple pipes & cables for water, gas, electricity, etc. to be grouped together at a single core removal point.

Example of installation location

  • Wall penetrations of piping for hot water heaters

Features

One core removal point

Multiple pipes & cables for water, gas, electricity, etc. can be completed with a single core removal. (Core removal φ160)

No caulking required

The seal packing adheres closely to various piping & cables to prevent water intrusion.
Therefore, caulking is not required.

Double-sealing

The seal gasket is double-layered to enhance watertightness.

Drainage channel

The internal drainage channel ensures that water does not accumulate even if it does seep in.
Water is discharged outdoors through the drainage channel.

Easy to position

The guide packing on the wall side fits into the sleeve hole for easy positioning (centering).

In addition to the core removal for φ160, we also have products for φ200 & φ100, so please consult us separately.

Things to note

  • Avoid direct sunlight. Be sure to install a water heater cover or similar covering to prevent exposure to sunlight.
  • If gaps are found between the seal packing & the ALC board, caulk the gap separately.
  • Piping & cables must be inserted in place. Inserting them in the wrong places may cause gaps.
  • Cannot be used in fire zones & fire spread lines.

Related product

Please feel free to contact us about our products.