1. HOME
  2. Product
  3. Flexible joint
  4. ZTF-2000

Flexible joint

ZTF-2000

Flange type

  • Chemical piping
  • Hot spring piping
  • Please refer to “Product Drawings” and “Product Specifications” for detailed information such as materials of each part.
  • Please refer to the “Installation Instructions” for installation procedures.

Applications and Features

Purpose

  • Gap adjustment of plumbing & absorbing lateral movement.

Specification

Size
PH:15A~200A               SH:15A~50A
Tempreture
  • -20℃~150℃
Maximum working pressure
  • 15A~100A:0.98MPa
  • 125A:0.78MPa
  • 150A:0.58MPa
  • 200A:0.48MPa
  • Maximum operation pressure shows the figure in normal temperature condition.
Flange rating
  • JIS5K、JIS10K、JPI、JIS7.5K
  • Please contact us for other flanges.

Features

  • This flexible joint uses fluoroplastic for the hose, which has excellent corrosion, heat, and weather resistance.
  • Fluoroplastic wetted parts, both loose flange type.
  • Straight hose (SH): Straight hose made of fluoroplastic. The flat inner surface prevents liquid accumulation.
  • Pliable Hose (PH): Corrugated fluoropolymer hose. It is flexible & can absorb displacement.
  • Changes in material, specifications, etc. are available upon request.

Note

  • When using vaporizable fluids such as corrosive gases or hydrochloric acid, permeated corrosive components may absorb moisture in the air and generate acid, which may corrode stainless steel blades. If this possibility exists, use the “PP blade specification.
  • In case of high specific gravity fluid, fuel fluid & high pressure steam, hose inside might put on static electricity. When accumulated static electricity beyond limit, the condensed static electricity, we recommend electric conductive fluorocarbon resin hose with keeping anti-corrosive performance. And pay attention to operate low velocity as possible.

Related product

Please feel free to contact us about our products.