Flexible joint
ZTF-6000
Outer layer:Stainless Steel Bellows / Inner layer:PTFE Steaight Hose
- Chemical piping
- Hot spring piping
- Please refer to “Product Drawings” and “Product Specifications” for detailed information such as materials of each part.
- Please refer to the “Installation Instructions” for installation procedures.
Applications and Features
Purpose
- Gap adjustment of plumbing & absorbing lateral movement.
Specification
- -20℃~150℃
- 20A~40A:0.98MPa
- 50A:0.78MPa
- 65A:0.68MPa
- 80A~100A:0.58MPa
- 125A~200A:0.49MPa
- Maximum operation pressure shows the figure in normal temperature condition.
- JIS5K、JIS10K、JPI、JIS7.5K
Features
- Fluoroplastic hose is inserted into the inner surface of the stainless steel flexible joint.
- The flat inner surface prevents liquid accumulation.
- Fluoroplastic wetted parts, both loose flange type.
- Changes in material, specifications, etc. are available upon request.
Note
- When using vaporizable fluids such as corrosive gases or hydrochloric acid, permeated corrosive components may absorb moisture in the air and generate acid, which may corrode stainless steel blades. If this possibility exists, use the “PP blade specification.