1. HOME
  2. Product
  3. Seismic isolation unit
  4. Slider unit

Seismic isolation unit

Slider unit

  • Water supply piping
  • Cold and hot water piping
  • Steam piping
  • Oil piping Drainage piping
  • Rainwater piping
  • Ventilation piping
  • Chemical piping
  • Medical gas piping
  • Food piping
  • Please refer to “Product Drawings” and “Product Specifications” for detailed information such as materials of each part.
  • Please refer to the “Installation Instructions” for installation procedures.

Applications and Features

Product Description

This system consists of two seismic isolation flexible wires mounted in an L-shape via elbows, with the elbows supported by seismic isolation sliders.

Features

Space & cost saving

The unit installation area is small, & the distance (height) from the ceiling to the piping can be set at a minimum of 600 mm.
The turnbuckle also facilitates level adjustment.
Cost-saving unit with simple structure.
Multiple pipes can be supported at a single location.

Not affected by aging

Although there is concern that the spring system may lose spring performance due to long-term loading, our slider type receives the load with bolts, so there is no change over time in the follow-up characteristics to the displacement of the piping.
In addition, all major components are made of stainless steel for excellent corrosion resistance.

Things to note

  • Set guide bar parallel to ground side pipe line.
  • Both pipe lines shall be located as designed.
  • Tighten bolt for flange diagonally & evenly.
  • Both horses shall be located near by flexible joint.
  • Building & ground side pipe material shall be SGP or more mechanically strong material.
  • In case of polyvinyl chloride pipe, short pipe made of polyvinyl chloride lining on steel pipe is necessary for horse.
  • When connect pipe, screw connection should avoid because of leakage risk. So,welding or flange connection are recommended.
  • Earch pipe shall be fixed to horse by means of 2 sets of U bolt as shown in drawing 1 or welding method.
  • Orepare enough space around slider unit in order to perform sufficient movement when earthquake happen.

Related product

Please feel free to contact us about our products.