1. HOME
  2. Product
  3. Seismic isolation unit
  4. Control unit

Seismic isolation unit

Control unit

  • Water supply piping
  • Cold and hot water piping
  • Steam piping
  • Oil piping Drainage piping
  • Rainwater piping
  • Ventilation piping
  • Chemical piping
  • Medical gas piping
  • Food piping
  • Please refer to “Product Drawings” and “Product Specifications” for detailed information such as materials of each part.
  • Please refer to the “Installation Instructions” for installation procedures.

Applications and Features

Features

Space & cost saving

The use of a controller eliminates the need for hanging support for seismic isolation flexible cables.
This system is ideal when there are height restrictions from the ceiling.
Multiple pipes can be supported by a single controller, saving space & cost.

Things to note

  • Both pipe lines shall be located as designed.
  • Tighten bolt for flange diagonally & evenly.
  • Both horses shall be located near by flexible joint.
  • Building & ground side pipe material shall be SGP or more mechanically strong material.
  • In case of polyvinyl chloride pipe, short pipe made of polyvinyl chloride lining on steel pipe is necessary for horse.
  • When connect pipe, screw connection should avoid because of leakage risk. So, welding or flange connection are recommended.
  • Each pipe shall be fixed to horse by means of 2 sets of U bolt as shown in drawing 4 or welding method.
  • Prepare enough space around slider unit in order to perform sufficient movement when earthquake happen.

Related product

Please feel free to contact us about our products.