Seismic isolation unit
Riser unit
- Water supply piping
- Cold and hot water piping
- Steam piping
- Oil piping
- Drainage piping
- Rainwater piping
- Ventilation piping
- Please refer to “Product Drawings” and “Product Specifications” for detailed information such as materials of each part.
- Please refer to the “Installation Instructions” for installation procedures.
Applications and Features
Features
Space & cost saving
Vertically mounted seismic isolation flexible joints can absorb displacement through the deformation performance of the seismic isolation flexible joints themselves, saving space & cost.
Ideal for stormwater & drainage lines
Ideal for low-pressure rainwater & drainage lines.
Things to note
- Both pipe lines shall be set with centering
- Tighten bolt for flange diagonally & evenly.
- Pipe side flange face shall be clean & without any harm on gasket face.
- In case of polyvinyl chloride pipe, short pipe made of polyvinyl chloride lining on steel pipe is necessary for horse.
- When connect pipe, screw connection should adoid because of leakage risk. So, welding or flange connection are recommended.
- Each pipe shall be fixed to horse by means of 2 sets of U bolt as shown in drawing 1 or welding method.
- Prepare enough space around slider unit in order to perform sufficient movement when earthquake happen.
- Both horses shall be located near by flexible joint, as possible.
- Building & ground side pipe material shall be SGP or more mechanically strong material.